Teac DVR AQ VU User Manual

Function specifications  
Video input  
Units specifications  
Video specifications  
Visual Data Recorder  
Input signal  
NTSC ( Composite video 75ohm 1Vp-p )  
function  
Max Field rate  
Number of cameras  
60 fields per second  
Video input  
Video output  
Picture data  
handling  
4ch, BNC NTSC VBS 1.0 Vp-p 75 ohm  
Up to 4 cameras, Auto-skip absence channel.  
When active cameras are 3 channels, ch-1 is recorded twice.  
1ch -> 2ch -> 1ch -> 3ch  
1ch, BNC NTSC VBS 1.0Vp-p +/-1.0% 75 ohm  
Quantization frequency/bit : 13.5MHz/8bit  
Video compression : Motion JPEG (Original)  
AQ-VU  
Indication  
function  
Video viewing  
4 channels per screen or full screen viewing ( selected channels)  
4 Selectable waveform or bar meter (overlay)  
Date and time : Current time, Record Y/M/D H:M:S  
Operation display : Operation status  
Channels and  
Video interval  
CHs  
Pixels  
Recording interval (fields/sec)  
Waveform/Bar meter  
Character display  
1
2
3
4
5
1
2
3
4
4
720 x 240  
720 x 240  
720 x 240  
720 x 240  
360 x 120  
60  
30  
30/15  
15  
Channel number : Display/non-Display selectable (All channels)  
Push REC button for REC standby, push FWD button to start recording  
Trigger function record  
Recording  
mode  
Start operation  
Stop operation  
Hard disk mode  
Playback operation  
60  
Data specifications  
Input  
External signal (START/STOP)  
4ch Sampling Frequencies 2kHz fix  
Manual (Press STOP button)  
Input ranges  
Output  
+/-1, +/-2, +/-5V  
4ch  
Trigger mode  
External control (Start/Stop signal)  
Output ranges  
Quantization bit rate  
Sampling method  
Others  
+/-2V fix  
OVERWRITE : Endless record by overwriting older video  
ONE WAY : Record stops on hard disk full  
Record resumes on replacing or initializing hard disk  
Normal playback, Reverse playback, Still image playback,  
Skip playback, Block jump, Fast playback (x2, x4, x8),  
Fast reverse playback (x2, x4, x8), Slow playback (1/2, 1/4, 1/8),  
Slow reverse playback (1/2, 1/4, 1/8)  
16bit (LSB 1 bit is used as identification sign)  
Successive approximation type / Multiplexer type  
Synchronous 4 channels  
Playback  
Sync accuracy  
Sync signal  
+/-1 frame (in one video channel mode)  
Start/Stop signal input :  
video and data recording  
High-speed driving test  
Starts on Low, stops on Hi (polarity reversible)  
Duration : 100mS or more. Repeat duration: 600mS or more  
Sampling clock signal input : Sampling clock of measuring data (200 kHz or less)  
Alarm signal output : Indicates malfunctions of this unit  
Event signal input :  
Search  
Time search : Search by record date and time  
Event search : Search from event start date time list  
ID search : Search from recording start point list  
Stores latest 1000 events (event start date and time)  
The video and analog data is easy to verify  
using the built-in LCD monitor. Visual Data  
Recorder AQ-VU is a unification of a visual  
and data measurement.  
Event  
Menu  
Event list  
Negative logic pulse or make-contact, +5V pull-up (10k ohm) Stores event on Lo  
Serial interface signal : TTL input / output  
For events with duplicated time, the first event is stored.  
*
Main unit settings  
Record settings  
Monitor settings  
Pre-trigger  
Time correction, 30 seconds correction, Communication  
Hard disk mode, Analog input ON/OFF, Hard disk initialization, etc  
Character (date and time) / Bar graph selectable  
Set the recording time prior to the recording start condition as  
mentioned above. Setting zero seconds is equivalent to no  
(with not-delete) pre-trigger function  
Ethernet  
TCP/IP 100Base-TX  
Recording media  
2.5" removable HDD, using removable type package  
Capacity : 40GB  
Vehicle and rail safety test  
and driving test  
AQ-VU is a visual data recorder with 4 channels video and analog  
signals that can be synchronously recorded and played back. Video  
and data can be verified or played-back without a PC using a LCD  
monitor and stand-alone AQ-VU. AQ-VU is a remarkable data  
External  
Exchanging operation :  
level trigger  
function  
Exchange after stopping REC or PLAY, then shutting down the power.  
Recording time : Approx. 5 hours / Approx. 10 hours (HDD:80GB)  
Initialization : Quick (instant), Full (several hours with 40GB HDD)  
Level trigger  
Analog level  
Set the level trigger threshold of designated channel.  
When the analog input signal exceeds the threshold level,  
the recording starts.  
Internal clock accuracy less than 60 seconds per month (ambient temperature 25 degC, at operation)  
Operating environment  
recorder that can visually confirm  
connecting to a PC.  
a
physical event without  
Record start  
condition  
Choice one of 1Channel to 4Channel.  
Temperature  
Temperature / Humidity (operating) : 0 to 35 degC / 10 to 80%RH  
Temperature(non-operating) : -20 to 60 degC non-condensing  
A trigger direction against the threshold level. UP(default) / DOWN  
Set the level trigger threshold [example : +50% ]  
The recording time prior to the recording start condition [0 to 999 sec]  
When the START/STOP signal at the SYNC IN connector on the  
rear panel is changed from L level to H level, the recording stops.  
It is started with an operation button  
Always remove the HDD pack out of the main body at the time of the  
*
Product line  
transportation by all means.  
External trigger  
Safety/Electromagnetic Radiation  
Comply with Electrical Appliance and Material Safety Law Conform to VCCI Class A  
Current / Power consumption  
Manual operation  
Internal clock  
32 channels synchronized recording  
Others  
Correction : Manual entry in Monitor screen, or 30 seconds  
auto correction  
Approx. 2A / 24W (excluding a supply power to the camera on 12V operation)  
Power Supply  
By connecting with LX-100 series data recorder,  
as much as 32 channels of data can be  
synchronously recorded.  
10 to 17V DC , 100 to 240V AC 50/60Hz (when using an adapter)  
Dimension ( W x H x D )  
Approx. 200 x 60 x 205 mm , 7 7/8" x 2 3/8" x 8 1/16" (excluding protruding Parts)  
Weight  
VIDEO OUT Connector  
CAMERA IN Connector  
LAN Connector  
SYNC IN Connector  
Equipment maintenance  
such as elevators  
DC IN Connector  
POWER Switch  
Approx. 2.3kg/5.07lb (Including 40GB HDD pack)  
Standard accessories  
Manual, Veiw Softwarer ( CD-ROM ), HDD Pack ( 40GB ), USB cable, BNC cable, AC adapter  
CAMERA POWER Connector  
LCD Display  
ANALOG IN/OUT Connector  
POWER LED  
OPTION  
LX-100 series sync. kit  
VISUAL DATA RECORDER  
AQ-VU  
Contents of Kit  
Temporary monitor of plumbing  
and pump pressure such as  
in air conditioning repair  
Cable  
LX View Basic SoftwarePL-S1100)  
LX View Sync. Option Software  
Network Monitoring AQ-Net (PL-S1100 )  
Adapter cable for camera power supply (Approx. 10cm) CL-AQ-CPWR  
BNC conversion cable (1.5m) CL-AQ-BNC  
HDD Pack (40GB) PH-AQ-40  
HDD Pack (80GB) PH-AQ-80  
Factory/Plant equipment  
MENU Key  
FWD Key  
PAUSE Key  
REV Key  
MONITOR Key  
STOP Key  
REC Key  
Key  
ENTER Key  
It is used in a wide field  
[ Product line ]  
[ Architecture ]  
Extended recording at an unattended automatic product line  
Building skew and bridge shake  
HDD Pack  
[ Vehicle performance test ] Vibration data with synchronous video  
on high-speed driving test  
17  
200  
17  
Unit : mm  
[Bio-measurement] Driver's bio-measurement with synchronous video  
[ Product line ]  
Monitor to find a product line problem  
and record vibration outbreak  
Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Features and specifications are subject to change without notice. Precaution : To ensure safe handling and operation, read the Instruction Manual before use.  
[Support Service ] Temporary measurement and monitor of manufacturing  
support service  
Information Products Division  
[ Elevators ]  
[ Factory ]  
Monitor elevator malfunction  
1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan  
Phone : +81-42-356-9161  
Periodic maintenance of plant equipment  
and temporarily monitor faulty point  
Environmental tests of machinery  
for deterioration, quake resistance, weather change  
Production line safety check  
FAX : +81-42-356-9185  
[ Machinery ]  
[ Product line ]  
[ University / Research organization ]  
PRINTED IN JAPAN 1008 1 NH BSC-029B  
Copyright TEAC CORPORATION 2008  
 

Technics Cassette Player RS TR777 User Manual
Teledyne Drums T200H M User Manual
TomTom GPS Receiver 1EG005211 User Manual
Toshiba Flat Panel Television 62HM94 User Manual
Toshiba Projection Television 46HX83 User Manual
Uniden Cordless Telephone DECT160 User Manual
Uniden Cordless Telephone EXP370 Series EXP380 Series User Manual
Velodyne Acoustics Speaker SMS 1 User Manual
Vienna Acoustics Speaker Waltz Grand Series User Manual
Vizio Car Video System E320i A2 User Manual